My ESP32 CAM (Aliexpress link: https://www.aliexpress.com/item/1005003804757059.html?spm=a2g0o.order_list.order_list_main.81.2ba01802biG77w) can't connect to Wi-Fi. I've tested the CameraWebServer Example, the AsyncUDPClient Example, and the SimpleWebServer Example, they all either infinately search for the Network, or say "WiFi Failed". I don't get any errors, so I'm pretty sure it's all set up right (the board is set as the "AI THINKER ESP32-CAM"), also I checked and im pretty sure the soldier points beside the antenna are set to use the built-in one (Though i've tested with and without the one included). The SSID and Password I'm entering are 100% correct, I've tried this multiple times, and I can connect new devices in seconds, neither have any special characters, just letters and numbers. The network is 2.4g, I specifically set the router to seperate the 5g and 2.4g channels to different SSID's, they're unmistakable. Is my ESP32 defective or am I making a mistake?
1 post - 1 participant